midget

MG Midget AH Sprite Kits

Mk1 (Frogeye) Mk2 Sprite, Midget Mk1 See separate page (Blue button below)

Full sets of kits to suit your car (second blue button below)

!
!

MG Midget AH Sprite Bonnet Fitting Kit (Stainless)

Grove Components' MG Midget Bonnet Fitting Kit contains all of the A2 Stainless Steel threaded fasteners and washers required to fit.

Bonnet to hinges.

Locating cup and Catch Plate to Slam Panel

Hook Bracket to Slam Panel

Bonnet Stay (either rod or telescopic stay)

Buffers to wing and bonnet

Locking Pin to bonnet

   PLEASE NOTE:- This kit does not include the 3" Bolt for fitting the Hinge to the Body. This can be bought separately from Grove Components.

3” bolt Stainless steel Grove Part Number UNFHX05048BSS

3” bolt hi-tensile steel Grove Part Number UNFHX05048BZP

 

MG Midget AH Sprite Boot Fitting Kit - Stainless

The Grove Components MG Midget/AH Sprite Boot fitting kit contains all of the A2 Stainless Steel threaded fasteners and washers required to fit:-

Hinges

Striker Plate

Latch and Handle

Stay & Buffers

MG Midget AH Sprite Brake Drum (Rear) Retainling Screws - Stainless

MG Midget AH Sprite Front Chrome Bumper Fitting Kit 61-69 (Stainless & Chrome)

Suits 1961-1969 cars Sprite Mk II and III, Midget Mk I and II, Early 1275 Models

Grove Components' Midget/Sprite Front Bumper Fitting Kit contains the A2 stainless and Chromed threaded fasteners and washers required to fit the Front Bumper.

This kit fits:-

Towing Eye and Brackets to Chassis

Spring Bar to Brackets

Overriders and bumper to Spring Bar

Chrome headed dome headed Bolts, bumper to Spring Bar

Number Plate Support and Bracket to Bumper

NOTE This kit does not include the spacers or grommets.

MG Midget AH Sprite Rear Chrome Bumper Fitting Kit (Stainless/ Chrome)

Suits 1961-1969 cars Sprite Mk II and III, Midget Mk I and II, Early 1275 Models

Grove Components' Midget/Sprite Rear Bumper Fitting Kit contains the A2 Stainless and Chromed threaded fasteners and washers required to fit the Front Bumper. This kit fits:-

Brackets to Floor and Rear Vallance

Spring Bar to Brackets

Overriders and bumper to Spring Bar

Chrome headed dome headed Bolts, bumper to Spring Bar

Number Plate Support to Rear Panel

NOTE This kit does not include the spacers.

MG Midget AH Sprite Front Bumper Fitting Kit Later cars (Stainless Steel)

Suits late 1275 (1970-74) cars with split rear bumper

Grove Components' Midget/Sprite Front Bumper Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit the Front Bumper.

This kit fits:-

Towing Eye and Brackets to Body

Spring Bar to Brackets

Overriders to bumper and Spring Bar

Number Plate Support toBumper

NOTE This kit does not include the spacers.

MG Midget AH Sprite Rear Bumper Fitting Kit (Split Rear) (Stainless Steel)

Suits late 1275 (1970-74) cars with split rear bumper

Grove Components' Midget/Sprite Rear Bumper Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit the Front Bumper.

This kit fits:-

Brackets to Body

Spring Bar to Brackets

Overriders, Lamp Bracket, Bumper and Spring Bar to Mounting Bracket.

Spring Bar to Bumper

NOTE This kit does not include the spacers.

MG Midget AH Sprite Door fixing Kit - Stainless

Suits all Models with window winders from H-AN8, G-AN3 up to and including 1500 models.

The Grove Components MG Midget/AH Sprite Door Refurbishment Kit contains all of the Stainless Steel threaded fasteners and washers required to replace the standard fasteners in both N/S & O/S doors Each kit will replace …
       Door Handles and Remote

       Door Latch and Striker
       Window Channels and Regulators
       Quarter Light Fixings
       Hinges

All contents and components for each functional section of the door (as listed above) are bagged and labelled separately.

All items in the kit are A2 Stainless Steel or better except for 4 speed clips (spire nuts) which are zinc plated.

 

MG Midget AH Sprite Front Wing Fitting Kit (2 Wings)

Grove Components' MG Midget Front Wing Fitting Kit contains all of the A2 Stainless threaded fasteners and washers required to fit Both Front Wings.

Wing to front valance,

Wing bracket to bulkhead,

Gusset to footwell side,

Wing to bonnet landing panel

Wing channel to bulkhead. 

Covers All Models except "Frogeye".

 

MG Midget AH Sprite Seat Runner Kit Early Cars - (Stainless)

Suits Mk II and III Sprites up to HAN 8 55501 and all 948 and 1098 Midgets

Grove Components' Midget/Sprite Seat Runner Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit :-

Upper runner to seat frame.

Lower runner to floor.

PLEASE NOTE:- this kit is for runners without wood packing. If you need a kit with the longer bolts please contact us.

MG Midget AH Sprite Seat Runner Fitting Kit (Stainless Steel)

Suits all Sprites and Midgets with seats including a diaphragm (Han 8, 1275 and 1500 models)

Grove Components' Midget/Sprite Seat Runner Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit :-.

Upper runner to seat frame.

Lower runner to floor.

 

MG Midget AH Sprite Outer Engine Fitting Kit 1275 (Stainless Steel)

Suits all 1275 engined cars

The Grove Components Midget Sprite Outer engine kit provides the threaded fasteners and washers in A2 Stainless Steel to fit:-       

Alternator/Dynamo

Sump

Backplate

Timing Cover

Distributor

Heat shield (carbs) brackets

Thermostat Housing

Water Pump

Fan

Cylinder head (nuts/washers)

MG Midget AH Sprite Outer Engine 948 1098 Fitting Kit - Stainless

Suits 948 and 1098 cars

Grove Components' Midget/Sprite Outer Engine Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit :-

Water Pump

Thermostat

Cooling Fan

Tappet Side Covers

Distributor

Timing Cover

Front Plate

Engine Backplate

Sump

Alternator/Dynamo

Cylinder Head Nuts

NOTE There are other fittings needed on the engine many of these are strength critical items where hi-tensile steel bolts must be used.

MG Midget AH Sprite Engine Bay Extras Kit - Stainless

Suits all 1275 & 1500 cars 

Grove Components' Midget/Sprite Engine Bay Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit :-

Distributor

Horns

Fuse Box

Heater Box

Earth Strap

Coil

Starter Solenoid

Wiper Motor

Washer Bottle

MG Midget AH Sprite Engine bay (early) Items - Stainless

Suits Sprite and Midget Pre 1275 cars

Grove Components' Midget/Sprite Engine Bay Fitting Kit contains the A2 stainless threaded fasteners and washers required to fit :-

Heater

Heater Fan

Washer Bottle

Horns

Earth Strap

MG Midget AH Sprite Engine to Gearbox Fitting Kit 1275 (Stainless).

To fit 1275 cars.

Grove Components' MG Midget Sprite Engine to Gearbox Fitting Kit contains all of the A2 Stainless threaded fasteners and washers required to fit a 1275 Gearbox to the Engine.

MG Midget AH Sprite Engine Mounting Fitting Kit 1275 (Stainless).

To Fit 1275 cars.

Grove Components' MG Midget Sprite Engine Mountings Fitting Kit contains all of the A2 Stainless threaded fasteners and washers required to fit a 1275 engine to the mountings and body.

MG Midget AH Sprite Front Valance Assembly Fitting Kit - Stainless

The Grove Components MG Midget/AH Sprite Front Valance Assembly fitting kit contains all of the A2 Stainless Steel threaded fasteners and washers required to fit the Front Assembly (valance, radiator duct and bonnet landing panel) to the chassis rail and radiator mounting bracket.

MG Midget AH Sprite Gearbox Mounting Fitting Kit 1275 (Stainless)

To Fit 1275 cars.

Grove Components' MG Midget Sprite Gearbox Mountings Fitting Kit contains all of the A2 Stainless threaded fasteners and washers required to fit a 1275 Gearbox to the mountings and body.

MG Midget AH Sprite Headlight Bucket Fitting Kit - Stainless

MG Midget AH Sprite Headlight Bucket Fitting Kit - Stainless

Contains the Stainless steel threaded fasteners to fit the headlight bucket and rim.

MG Midget AH Sprite Hood Frame Fitting Kit (Stainless)

Grove Components' MG Midget Hood Frame Fitting Kit contains all of the A2 Stainless threaded fasteners and washers required to fit.

Frame to body.

Bracket to body.

Frame to Header Rail.

Catch to Header Rail.

Pad and Hood to Header Rail.

   PLEASE NOTE:- This kit does not include the "Durable Dots" for fitting retaining rail to rear of cockpit. 

MG Midget AH Sprite Pedal box fitting kit Later cars - stainless steel.

Suits all models from G-AN 4, H-AN 9 on.

The Midget Pedal Box Kit contains all the threaded fasteners and washers needed to fit the Pedal box, Pedal box cover and Blanking Plate (passenger side). Being in A2 Stainless steel this kit will enhance your engine bay and look as good in years to come as when fitted.

MG Midget AH Sprite Pedal Box Fitting Kit Early Cars - Stainless Steel

  Suits all models pre G-AN 4, H-AN 9.

MG Midget Pedal Box Fitting Kit for early cars - Stainless Steel

MG Midget AH Sprite Petrol Tank Fitting Kit (Stailess Steel)

Grove Components' Midget/Sprite Petrol Tank Fitting Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit the Petrol Tank.

MG Midget AH Sprite Radiator fitting Kit - Stainless

The Grove Components MG Midget/AH Sprite radiator fitting kit contains all of the A2 Stainless Steel threaded fasteners and washers required to fit the Radiator, Splash shields, Brackets and Cowls for later cars.
Each Kit contains Stainless Steel fasteners and washers to fit one of the following:

Vertical Flow Systems

Cross Flow Systems

1500 Systems