mgb no number

MGB Kits

Listed Alphabetically

!

MGB Bonnet Catches Only Fitting Kit - Stainless

Note:- This kit is included in the full bonnet kit

Grove Components' MGB Bonnet Catching Fixing Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit :- 

Bonnet Lock.

Safety Catch.

Safety Catch Striker.

MGB Bonnet Fitting Kit - Stainless

Grove Components' MGB Bonnet Fitting Kit contains all of the A2 Stainless Steel threaded fasteners and washers required to fit :-

Bonnet Hinges.

Buffers.

Bonnet Lock.

Safety Catch.

Safety Catch Striker.

Stay (Telescopic or rod)

 

 

MGB Boot (Roadster) Fitting Kit - Stainless Steel

Contains fasteners to fit boot hinges and rod/stay.

Please Note:- All items are Stainless Steel except the double coil washer.

MGB Chrome Bumper Front Fitting Kit - Stainless, Chromed and Hi Tensile.

Grove Components' MGB Front Bumper Fitting Kit contains the A2 stainless, chrome plated and zinc plated Hi tensile threaded fasteners and washers required to fit the Front Bumper to Chrome Bumper MGBs.

Models Covered include roadsters and GTs, Chrome Bumper cars.

This Kit Fits:-

Brackets to body

Corner brackets to front valance

Bumper to brackets 

Overriders to bumper

 

NOTE  The bolts holding the bumper bracket to the body are zinc plated Hi tensile steel for safety reasons. All other items are Stainless or Chrome plated Steel.

 

 

MGB Chrome Bumper Rear Fitting Kit - Stainless and Chromed items

Grove Components' MGB Rear Bumper Fitting Kit contains the A2 stainless, Chrome Plated and Zinc Plated Hi Tensile threaded fasteners and washers required to fit the Rear Bumper to Chrome Bumper MGBs.

This Kit Fits:-

Mountings to body

Brackets to mountings

Overriders to bumper 

Bumper to Brackets

 

Models Covered include roadsters and GTs, Chrome Bumper cars. 

NOTE  The bolts holding the bumper bracket to the body are zinc plated Hi tensile steel for safety reasons.

 

 

MGB Door Refurbishment Kit (Stainless)

Fittings for Two Doors

Grove Components' MGB Door Fitting Kit contains the A2 stainless threaded fasteners and washers required to fit both doors to an MGB

The Kit suits most models except the early pull handle roadsters (Please contact us for a quote) It includes V8s and GTs.

The fixings replaced are

Door handles and remote

Door latch and striker

Window channels and regulator

Boot/tailgate

MGB Door Hinges Full Set - Stainless

Contains all the Pozi countersunk headed screws needed to fit both front door hinges in Stainless steel

MGB Door Hinge to Body Pozi Countersunk Screws - Stainless

Fits 2 Doors. Uses A2 Stainless Steel Pozi countersunk screws to fit hinges to the A post.

MGB Door Hinge to Door - stainless

Fits 2 Doors. Uses A2 Stainless Steel Pozi countersunk screws to fit hinges to the door.

MGB Engine Mounting Chrome Bumper Cars - Stainless

This kit fits all Chrome Bumper Cars

MGB Engine Mounting Rubber Bumper Cars - Stainless

This Kit Fits All Rubber Bumper 1800 Models

MGB Engine to Gearbox - Stainless 18V, GD, GG

Suits GHN/D 4 on

If Unsure of which kit, in this kit the starter motor bolts are different lengths.

MGB Engine to Gearbox - Stainless 18G, GA GB

Suits Pre GHN/D 4 engines

The starter motor bolts are the same length.

MGB Exhaust Manifold to downpipe Studs and Brass Nuts.

suits all 1800 engines.

MGB Exhaust Manifold to Head

Suits 18V engines

MGB Front Wing Fitting Kit - Stainless Steel

Note:- only fits one wing

The Grove Components Front Wing Fitting kit contains all the A2 Stainless threaded fasteners, nuts and washers needed to fit ONE front wing and includes the small oval washers.

Some specs use large oval washers (3 a wing) these can be bought separately.

Note it does not contain the spacers and wing edge clamp for a GT.

MGB Front Valance Fitting Kit - Stainless

Suits All CHROME BUMPER cars

Grove Components' MGB Front Valance Fixing Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit the Front Valance to Chrome Bumper MGBs.

It does not include the fixed nuts.

MGB Front Valance Fitting Kit (Rubber Bumper Cars) - Stainless

Suits All RUBBER BUMPER cars

Grove Components' MGB Front Valance Fixing Kit contains the A2 Stainless Steel threaded fasteners and washers required to fit the Front Valance to Rubber  Bumper MGBs.

MGB Gearbox Mounting Kit - Stainless

Suits 4 Synchro Gearboxes

PlPLEASE NOTE - This kit does NOT include the steady pin, bush and nut.

MGB Grill Fitting Kit - Stainless

Grove Components' MGB Front Grill Fitting Kit contains all of the A2 Stainless Steel threaded fasteners and washers required to secure the Grill to the car.

This Kit fits:-

 Steady Bracket to the Slam Panel

 Steady Bracket to the Grill

 Grill to Radiator Duct Panel

 

MGB Headlight Bucket Fitting Kit - Stainless

Grove Components' MGB Headlight Fitting Kit contains all of the A2 Stainless Steel threaded fasteners and washers required to Fit:-

Headlamp Bowl To Wing

Retaining Rim to Inner Bowl

Please Note:- This kit does not include the adjusters.

 

MGB Heater Fitting Kit - Stainless

The Grove Components MGB Heater Fitting kit contains the A2 Stainless Steel pan head machine screws needed to fix the heater to the body of the car, with their relevant washers.

MGB Hose Clip Set (18G _ engines)up to 1972 - Stainless

18G_ engines Up to '72

MGB Hose Clip Set contains all the Stainless steel hose clips needed to fit radiator hoses and heater hoses to MGBs with 18G_ engines (Bottom hose has a metal elbow.)

MGB Hose Clip Set (18V engines)1972 on - Stainless

18V engines ’72 on

MGB Hose Clip Set contains all the Stainless steel hose clips needed to fit radiator hoses and heater hoses to MGBs with 18V engines (Bottom hose does NOT have a metal elbow.)

MGB Pedal Box Fitting kit - Stainless Steel.

The Grove Components MGB Pedal Box Fitting Kit includes all the A2 Stainless Steel threaded fasteners, nuts and washers needed to fit:-

Pedal Box.

Pedal box cover.

Blanking plate.